DIY Christmas Wreath Centerpiece With Greenery and Candle

by Glazed Glamor

A Christmas centerpiece does not need complicated flower arranging to look full and festive. This DIY Christmas wreath centerpiece starts with a simple floral-foam wreath, then builds up layers of evergreen branches, eucalyptus, pinecones, and a few silver ornaments.

A clear glass hurricane with a glowing flameless candle adds height in the center without hiding the greenery below. The finished arrangement works as a Christmas table centerpiece, but it can also be displayed on a coffee table, entryway console, or other flat surface.

Disclosure: Some of the links on this article are affiliate links. If you make a purchase through one of them, we may earn a small commission at no extra cost to you.

DIY Christmas Mason Jar Lanterns for a Cozy Glow

You can keep the arrangement traditional with fir and pinecones or use whatever winter greenery is easy to find. Because most of the materials are tucked directly into floral foam, you do not need advanced wreath-making skills to recreate it.

What You'll Need for a DIY Christmas Wreath Centerpiece

diy christmas wrath 1 DIY Christmas Wreath Centerpiece With Greenery and Candle

Gather:

You do not need every type of greenery shown in the photos. Two or three varieties are enough to give the wreath a full, layered appearance without making the supply list unnecessarily complicated.

Step 1: Prepare the Wreath Base

If you are using floral foam made for fresh flowers and greenery, soak it according to the package directions before you begin.

Place the wreath base flat on your work surface. Set the glass hurricane in the center to make sure it fits comfortably inside the opening, then remove the glass before you begin adding greenery.

Checking the fit first prevents you from building the arrangement too far into the center opening.

Step 2: Cut the Greenery Into Smaller Pieces

Cut the evergreen branches into manageable sections, roughly 5 to 8 inches long.

Keep a mixture of longer and shorter pieces. Longer branches work well around the outer edge, while shorter sections are useful for filling the top and inner part of the wreath.

It also helps to prepare a small pile of each type of greenery before you begin arranging. This allows you to work continuously instead of stopping every few minutes to trim more stems.

Step 3: Build the Evergreen Base

Start with your fullest evergreen, such as fir or cedar.

Push the stems into the floral foam at a slight outward angle. Work around the wreath in the same direction, overlapping each new piece slightly with the one before it.

diy christmas wrath 2 DIY Christmas Wreath Centerpiece With Greenery and Candle

Do not worry about making the arrangement perfect at this stage. The main goal is to cover the floral foam and establish a sturdy green base.

Use longer pieces around the outside edge and shorter greenery closer to the center opening. Continue working around the wreath until most of the foam is hidden.

This first layer provides most of the volume, so save more decorative greenery for the next step.

Step 4: Add Different Types of Greenery

Once the basic evergreen layer is in place, begin adding eucalyptus and your second type of greenery.

Space these pieces around the wreath rather than clustering them in one area. This keeps the Christmas greenery centerpiece visually balanced while introducing different leaf shapes, colors, and textures.

Eucalyptus can help break up the darker evergreen needles and create softer areas throughout the arrangement. You only need a few pieces placed between the fuller branches to make the contrast noticeable.

Turn the wreath occasionally while you work. Looking at it from several angles makes bare spots and uneven sections easier to see.

Step 5: Add the Pinecones

Before attaching the pinecones, place them loosely around the wreath and experiment with the spacing.

Five or seven pinecones gives you enough pieces to distribute around the arrangement without covering too much of the greenery. They do not need to sit at perfectly even intervals.

If your pinecones do not have stems, wrap floral wire around the base of each one and twist the ends together. Push the wire ends into the floral foam to secure the pinecone.

You can also attach each pinecone to a small wooden floral pick before inserting it into the wreath.

One Useful Amazon Find

22-gauge green floral wire is useful for securing pinecones and ornaments while blending into the surrounding greenery.

Step 6: Add the Silver Ornaments

Tuck several small silver ornaments between the greenery.

Instead of placing them at perfectly even intervals, scatter them around the wreath with slightly irregular spacing. This helps the centerpiece feel softer and less formal.

You can push the ornament hooks into the foam, secure the ornaments with floral wire, or attach them to small wooden picks.

diy christmas wrath 4 DIY Christmas Wreath Centerpiece With Greenery and Candle

The silver adds a little shine without overpowering the natural textures of the pinecones and greenery. If one ornament disappears too far into the foliage, pull it slightly forward so it remains visible from above.

Step 7: Add a Little Gold Detail

This step is optional, but a thin decorative gold wire can add another subtle festive accent.

Loosely weave the wire around the wreath, allowing it to curve over and between the greenery. Avoid pulling it tight against the branches.

A few relaxed loops are enough. The goal is to add a hint of metallic detail rather than create a solid band around the arrangement.

Step 8: Fill Any Gaps

Look at the wreath from above and from each side.

If sections of floral foam are still visible, tuck in small pieces of fir, cedar, eucalyptus, or your other greenery until the base is covered.

This is also a good time to move pinecones or ornaments that feel crowded, hidden, or too close together. Small adjustments can make the arrangement feel more balanced without requiring extra materials.

The goal is a full wreath where the greenery provides plenty of volume while still leaving the decorative details visible.

Step 9: Add the Glass Hurricane and Candle

Carefully place the glass hurricane in the center opening.

Then add a pillar-style flameless LED candle inside.

diy christmas wrath 3 DIY Christmas Wreath Centerpiece With Greenery and Candle

A battery-operated candle is the safer choice for this DIY Christmas wreath centerpiece because the surrounding greenery, pinecones, floral materials, and other decorations are combustible. Keep real flames away from the arrangement.

The hurricane adds height and creates a clear focal point in the center of the wreath without requiring additional flowers or ornaments.

Step 10: Make the Final Adjustments

Turn on the candle and look at the entire arrangement from several angles.

Pull a few greenery tips forward if the wreath feels too compact. Uncover any ornaments that have disappeared into the foliage, and reposition the pinecones so several are visible from different sides.

diy christmas wrath 5 DIY Christmas Wreath Centerpiece With Greenery and Candle

The finished arrangement makes an easy Christmas table centerpiece for a dining table, but its compact wreath shape also works well on a coffee table or entryway console.

How to Make the Centerpiece Look Full With Less Greenery

The easiest way to make the centerpiece look generous without using large amounts of greenery is to build it in layers.

Start with fuller, less decorative evergreen branches to cover most of the floral foam. Once you have created that foundation, add smaller amounts of eucalyptus or other contrasting greenery on top.

Let some branches extend beyond the outer edge of the wreath. If every stem finishes at exactly the same point, the arrangement can look stiff and overly uniform.

Using several stem lengths creates a softer, more natural outline. It also helps your Christmas greenery centerpiece appear fuller because the branches occupy space at different heights and distances from the base.

Easy Ways to Change the Look

You can adapt the same wreath base and arranging method to suit different Christmas decorating styles.

For a traditional look, replace the silver ornaments with red or gold baubles. If you prefer a more natural centerpiece, leave the ornaments out and use only greenery and pinecones.

Dried orange slices, cinnamon sticks, or small clusters of berries can also be added as seasonal accents. Keep the quantities restrained so the greenery remains the main feature.

If fresh greenery is not convenient, you can use artificial evergreen stems instead. With artificial materials, you will not need to soak floral foam intended for fresh stems, and the finished arrangement can be stored and reused.

Changing just one or two decorative elements can give the same basic wreath a different look from year to year.

Frequently Asked Questions

Can I make this Christmas wreath centerpiece with artificial greenery?

Yes. Artificial evergreen, eucalyptus, and other winter stems can be used in place of fresh greenery. This also makes the centerpiece easier to store and reuse for another Christmas season.

Do I need to soak the floral foam?

Only soak the foam if you are using a product designed for fresh flowers or greenery and its instructions call for soaking. If you are working entirely with artificial stems, follow the directions for the type of foam you are using instead.

How many pinecones should I use in a Christmas table centerpiece?

About 5 to 7 small or medium pinecones works well for the wreath size described here. The exact number can vary depending on the size of your wreath, pinecones, and other decorations.

Can I use a real candle inside the hurricane?

A flameless LED candle is the appropriate choice for this project because greenery, pinecones, floral foam, and decorative materials can be combustible. Keep open flames away from the arrangement.

A full-looking DIY Christmas wreath centerpiece comes together most easily when you build it in stages. Cover the floral foam with a generous evergreen base first, add contrasting greenery for texture, then tuck in pinecones and a few ornaments where they will remain visible.

Do not worry about making every section identical. Slight differences in branch length, pinecone placement, and ornament spacing help the arrangement feel natural rather than overly arranged.

Once the glass hurricane and flameless candle are in place, the greenery stays low while the light creates height at the center. The result is a festive centerpiece that can work with both traditional Christmas decor and simpler natural winter styling.

You may also like